whitehillbillies. my implements

Do you have any interesting implements to use with your Fergie?

Re: whitehillbillies. my implements

Postby whitehillbillies » Thu Dec 21, 2017 9:06 am

Dug' out the plough.

whb
Attachments
IMG_20171220_132956 - Copy.jpg
IMG_20171220_132956 - Copy.jpg (89.67 KiB) Viewed 1344 times
IMG_20171220_132846 - Copy.jpg
IMG_20171220_132846 - Copy.jpg (112.85 KiB) Viewed 1344 times
IMG_20171220_132835 - Copy.jpg
IMG_20171220_132835 - Copy.jpg (118.9 KiB) Viewed 1344 times
IMG_20171220_132828 - Copy.jpg
IMG_20171220_132828 - Copy.jpg (117.75 KiB) Viewed 1344 times
IMG_20171220_132816 - Copy.jpg
IMG_20171220_132816 - Copy.jpg (117.38 KiB) Viewed 1344 times
User avatar
whitehillbillies
 
Posts: 2469
Joined: Mon Aug 29, 2011 9:16 am
Location: Northern NSW,Australia

Re: whitehillbillies. my implements

Postby Hiawatha » Thu Dec 21, 2017 11:09 am

Good to see it in the light of day once again WHB :smile:

My advice is to not dismantle the frame unless you really need or want to , the bolts are an absolute B@$t@rd to get out !
The trailing furrow wheel is spring loaded , if the spring is broken you can make a replacement from a leaf spring from a light car or trailer . It also has a ridiculously over complicated needle roller bearing , totally un necessary , but easy to replace and cheap from any bearing supplier , otherwise a nylon bush can be made that will work as well if not better .
No real spares available new except points , Westlake in the UK will supply used bits over here but it costs an absolute fortune when transport and exchange rates are added .
Geoff at the haunt has some bits on occasion , I'm happy to go on a hunt :smile1:
-------- 1952 TED, 1957 FE35 Grey and Gold Deluxe
User avatar
Hiawatha
 
Posts: 3785
Joined: Tue Aug 30, 2011 7:55 am
Location: Victoria Australia

Re: whitehillbillies. my implements

Postby Chgperformance » Thu Dec 21, 2017 12:27 pm

Hiawatha wrote:My advice is to not dismantle the frame unless you really need or want to , the bolts are an absolute B@$t@rd to get out !



Eugh, dont say that! I need to unto two on my three furrow and get them out. Someone removed one of the plough disc clamps. :roll1:
Chgperformance
 
Posts: 328
Joined: Wed May 04, 2016 6:41 am

Re: whitehillbillies. my implements

Postby whitehillbillies » Fri Jan 04, 2019 10:03 am

Things on the move.
Relocated.
Just need to drive the Fergy, 5 Klms, around the corner.
Then all Tractor stuff off.
Heavy Horse Harness and saddles, etc removed.
Now for Landy, parts and all my tools.
whb
Attachments
IMG_20190104_133529.jpg
IMG_20190104_133529.jpg (182.7 KiB) Viewed 937 times
IMG_20190104_133546.jpg
IMG_20190104_133546.jpg (181.11 KiB) Viewed 937 times
IMG_20190104_134513.jpg
IMG_20190104_134513.jpg (167.8 KiB) Viewed 937 times
IMG_20190104_153844.jpg
IMG_20190104_153844.jpg (192.1 KiB) Viewed 937 times
User avatar
whitehillbillies
 
Posts: 2469
Joined: Mon Aug 29, 2011 9:16 am
Location: Northern NSW,Australia

Re: whitehillbillies. my implements

Postby Grunt » Fri Jan 04, 2019 12:07 pm

I occasionally have a look round my place and wonder where I’d start if I had to move and I don’t think I’ve got half as much as you. Have you found any thing that went missing ages ago or that you’d forgotten you had.
User avatar
Grunt
 
Posts: 3477
Joined: Sat Sep 03, 2011 9:34 pm
Location: Yorkshire, where puddings come from.

Re: whitehillbillies. my implements

Postby White Wolf » Sun Jan 06, 2019 12:37 am

Grunt wrote: Have you found any thing that went missing ages ago or that you’d forgotten you had.

I moved earlier in the year, oh hang on it's last year now. I found some things that were missing, had to make the painful decision to throw some things out and other things now trouble finding.

Wishing you a positive future with your move WHB's.
1950 TEA, 1962 MF35 petrol
User avatar
White Wolf
 
Posts: 970
Joined: Tue Jan 21, 2014 10:17 pm
Location: Victoria Australia

Re: whitehillbillies. my implements

Postby whitehillbillies » Mon Aug 19, 2019 8:38 am

Not sure if mentioned,
Picked up a 6ft finishing mower.
Cleaned up, just need 1 new belt, but will change both.
Going for scrap, so paid $0.00 :grin:
Pics covered in grass and old oil.

whb
Attachments
IMG_20190819_140356 - Copy.jpg
IMG_20190819_140356 - Copy.jpg (91.26 KiB) Viewed 416 times
IMG_20190819_140343 - Copy.jpg
IMG_20190819_140343 - Copy.jpg (98.89 KiB) Viewed 416 times
IMG_20190819_140332 - Copy.jpg
IMG_20190819_140332 - Copy.jpg (97.37 KiB) Viewed 416 times
IMG_20190819_140319 - Copy.jpg
IMG_20190819_140319 - Copy.jpg (100.45 KiB) Viewed 416 times
User avatar
whitehillbillies
 
Posts: 2469
Joined: Mon Aug 29, 2011 9:16 am
Location: Northern NSW,Australia

``

Postby whitehillbillies » Mon Aug 19, 2019 8:42 am

Bit of a clean up.
Gearbox oil looks like to was changed not that long ago, but will check colour again once running.

whb
Attachments
IMG_20190819_163103 - Copy.jpg
IMG_20190819_163103 - Copy.jpg (101.82 KiB) Viewed 416 times
IMG_20190819_163052 - Copy.jpg
IMG_20190819_163052 - Copy.jpg (100.88 KiB) Viewed 416 times
IMG_20190819_163038 - Copy.jpg
IMG_20190819_163038 - Copy.jpg (103.3 KiB) Viewed 416 times
IMG_20190819_140406 - Copy.jpg
IMG_20190819_140406 - Copy.jpg (87.91 KiB) Viewed 416 times
User avatar
whitehillbillies
 
Posts: 2469
Joined: Mon Aug 29, 2011 9:16 am
Location: Northern NSW,Australia

Re: whitehillbillies. my implements

Postby Hiawatha » Mon Aug 19, 2019 8:53 am

.Wow WHB :smile:
That makes my bargain slasher look pale in comparison.
Last edited by Hiawatha on Mon Aug 19, 2019 8:57 am, edited 1 time in total.
-------- 1952 TED, 1957 FE35 Grey and Gold Deluxe
User avatar
Hiawatha
 
Posts: 3785
Joined: Tue Aug 30, 2011 7:55 am
Location: Victoria Australia

Re: whitehillbillies. my implements

Postby whitehillbillies » Mon Aug 19, 2019 9:18 am

Thanks Hiawatha.
Just need Fergymal to give me details on what I have.
Have to take another pic of the plate
Much stronger looking than the 5ft one I have.

whb
Attachments
Finish Mower 2.jpg
Finish Mower 2.jpg (43.06 KiB) Viewed 410 times
User avatar
whitehillbillies
 
Posts: 2469
Joined: Mon Aug 29, 2011 9:16 am
Location: Northern NSW,Australia

Previous

Return to Implements

Who is online

Users browsing this forum: No registered users and 3 guests